Ask Experts Questions for FREE Help !
Ask
    KATWALK56's Avatar
    KATWALK56 Posts: 7, Reputation: 1
    New Member
    		  
    #1

    Sep 10, 2009, 11:16 AM
    Wiring up a digital thermostat
    I had a white and rodgers heat pump thermostat and while I was on vacation, it went bad. I went out and bought a 7 day digital hunters thermostat. Well stupid me did not mark the wires when I took it off the old one. Now I don't know how to place the wires with the new one. I have 1white, 1 red, 1 orange, 1 blue, 1 green, 1 yellow. I am lost, please help.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Sep 10, 2009, 05:35 PM
    Follow the wire color code that is in the directions that came with the new thermostat hopefully the original contractor that wired the system followed that standard code also.
    KATWALK56's Avatar
    KATWALK56 Posts: 7, Reputation: 1
    New Member
    		  
    #3

    Sep 11, 2009, 06:08 AM
    Do I keep the red jumper in and hook up the red wire to rh
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #4

    Sep 11, 2009, 07:21 AM

    Rh stays jumped to Rc and connect to R (Red)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Digital Thermostat Wiring [ 1 Answers ]

I have a GAS hot air heat system with A/C. It is a 2 zone, not multi stage, with a control thermostat on the first floor and slave thermostat on the second floor. The first floor stat has 6 wires, white, red (jumped to RC/RH) brown, orange, yellow, green. I believe the old stat to be faulty...

Changing from non digital thermostat to digital [ 1 Answers ]

I have an old non digital Honeywell T87F thermostat, gas burner with baseboard water heat. Can I change to a new digital Honewywell RTH230B and how? Thank you

Wiring for my digital thermostat [ 2 Answers ]

I have a hunter 44155c hunter thermostat and it hasn't worked right since I've had it I don't think its hooked up right . I have 5 wires , coming out of the brown wire is a red,green and white wire, and coming out of the white is a red and a white wire, I hope this makes since, something isn't...

Need help with wiring a Honeywell T8011 Digital Thermostat [ 4 Answers ]

I bought the 'T8011R1006' programmable Digital Thermostat to replace my existing 'T874R1822', Analog Thermostat that controls a 2-Stage Heating and 1-Stage Cooling Electric Heatpump, The Sub-base model of the existing thermostat is 'Q674L1710'. The volts going into the thermostat is 24V. The...

View more questions Search