Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cable size and length calculation for AMF Panel
[ 3 Answers ]
Dear Sir, I am basically Electrical Engineer working as Trainee in a firm related to Diesel Generators and AMF Panel. I want to learn to calculate the cable size and length if the KVA rating of AMF Panel is used. Say we have AMF PANEL of 10KVA 3PH. And the Panel Size is (H)850mm X (L)550mm...
Limits on length of ethernet cable
[ 6 Answers ]
I have an Airport Extreme wireless modem unit that is connected via ethernet cable to a hub that is then connected to a cable modem and to a PC, both of which are located downstairs in my family room. I also have a MacBook Pro laptop that I usually use upstairs on the other end of the house but...
Electrical panel rating
[ 7 Answers ]
I have a (residential) panel with 200 Amp wiring to the panel, on a 200 Amp circuit breaker. However, the paper sticker on the Bryant panel says that the panel is rated for 150 amps. The 200 amp service and the breakers all look original to the panel, has the UL rating stamp, etc. Is this okay,...
Difference between 110 V and 220 volt rating cable
[ 9 Answers ]
In usa domestic voltage is 110 volt whereas in britain and asia we use 220 volt. I was asked that whether can we use american cable for 220 volts supply. I know the current carrying capacity is based on the cross sectional area of the conductor and insulation thickness. In usa AWG is used whereas...
CAT6 cable length adapter?
[ 2 Answers ]
I currently have a wireless home network. I installed Linux Xandros onto a hard drive and installed it into my sons computer. Unfortunalty, after some researching, no Linux OS's are currently wireless adaptable. Even though I currently have the router in a lower heigth location than it should be... View more questions Search
|