Ask Experts Questions for FREE Help !
Ask
    drj3289's Avatar
    drj3289 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 26, 2009, 12:58 PM
    Using Low Volt Bulbs & power source in High Voltage Fixtures?
    Hi, I purchased 4 custom outdoor lantern fixtures for installation on top of rock wall columns in my front yard area. Each fixture was manufactured for 3 each 25 watt incandescent bulbs and has 18 awg wiring. I am under the assumption that these fixtures are made for a high voltage hook up. The question I have is am I able to use low voltage incandescent bulbs and power the fixtures up using a low voltage transformer for the purpose of ease of installation and cost? Thanks for your help...
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Aug 26, 2009, 02:34 PM

    This would not save you money even if it were possible. The low voltage bulbs will not fit a 120 v incandescent socket. A low voltage transformer would also cost about $50.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changing Light Bulbs that are in High Ceilings [ 4 Answers ]

Is there a secret to changing lightbulbs in chandeliers that are in chandeliers in high ceilings? Those long poles do not work. Does anyone have a suggestion besides a tall ladder? Thanks!

Light fixtures not working since I put in bulbs that were too powerful [ 2 Answers ]

Hi Everyone I have a light fixture that takes 5 20w light bulbs. 2 of the bulbs were dead and I stupidly replaced them with 50w bulbs whilst leaving the remaining 3 sockets with 20w bulbs. The lights initially worked but after a short time stopped working. Now they don't respond to me...

Required AC voltage for 12 volt DC [ 1 Answers ]

If I use a diode bridge across a single phase a.c. supply to produce 12 Vdc, what should the rms voltage of the a.c. supply be

Source for Hampton Bay Ceiling Fan CFL Light Bulbs [ 1 Answers ]

I have a 3X3 year old Hampton Bay Ceilings with PLSS13W2700 sprial 4 pin connectors. I can't find replacements that fit into the housing that are 4 pin. Anybody know of a source?

Fixtures burning out bulbs [ 2 Answers ]

Not sure if this is a fixture problem, or some other. It seems that I go through lightbulbs rather quickly in two different fixtures in my house. I've even tried those long life, power-saver bulbs, to no avail. Both fixtures are cheap. One is a basic lightbulb fixture that you plug into a...

View more questions Search