Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing a line in ryobi weedwhacker (dual line head)
[ 1 Answers ]
What steps do I need to take to re-line my ryobi weed whacker. The spool has two positions for the line, which way am I to line the spool. Any help would be greatly appreciated.
Utilizing a clothes washer line for an icemaker water line
[ 3 Answers ]
Hello! A few years ago, I moved my washer/dryer from an inside washer/dryer inset located in my kitchen into the garage. I turned this area into a pantry and left both the hot and cold water valves protruding from the wall, as well as the 220 for the electric dryer. I'm tearing out the...
Leaky lead supply line
[ 11 Answers ]
I found a leak in our building from an old lead supply line that runs underneath the floor. The floor boards come up right where the leak is - so I could get at it and got a good look and the lead pipe had been crimped to seal it. (the pipe was cut off and crimped)The pipe was leaking pretty...
How thick is the lead in a lead joint
[ 2 Answers ]
Im getting ready to take the Indiana pluming test and I was wanting to know how thick the lead Is suppose to be in the hub of the cast iron.
Replaced Main Water Line, Now Shower Line Is Clogged
[ 3 Answers ]
We had a leak, so we had the water line and sewage line from the house to the street replaced. Now we have no water in the shower. Some debris most have clogged up the line coming into the shower. All the other lines are fine. My Dad is somewhat of a handyman and wants to fix the problem... View more questions Search
|