Ask Experts Questions for FREE Help !
Ask
    bcrilly's Avatar
    bcrilly Posts: 2, Reputation: 1
    New Member
     
    #1

    Aug 17, 2009, 07:56 AM
    Removing concrete subfloor
    The main floor kitchen/dining room area (300 s.f.) of my ~100 year old house has ceramic tile laid on top of 3" to 4" of concrete. The concrete is poured directly onto the 3/4" floorboards supported by the joists. Unfortunately this concrete subfloor approach was common in my area when laying ceramic tile, but I don't know of anyone who has attempted to remove the concrete from the floor boards in order to replace it with hardwood flooring. Does anyone have experience in this type of demo/removal?
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
     
    #2

    Aug 18, 2009, 04:09 AM

    I had 3'' concrete in my kitchen of 115 year old house and had to remove it. It was pain in neck.

    Rented a small electric spade cheisel and started at door way.

    Made cut about 1' inside room. Then worked under creteand lifted. There was wire mesh in mine and had to be cut.

    Set up a negative air system to remove dust while working. This is done by putting a 24'' fan in window on exhaust. Hang plastic over all door ways and tape closed. Use OSHA approve mask.

    Good luck

    Chuck
    bcrilly's Avatar
    bcrilly Posts: 2, Reputation: 1
    New Member
     
    #3

    Aug 18, 2009, 08:22 AM
    Chuck,

    Thanks very much. Do you recall how long it took to remove say 100 s.f. of the concrete subfloor? Was there any damage to the ceiling below the floor joists?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #4

    Aug 18, 2009, 09:09 AM

    You may get a crack or two below but it is possible to do it without any damage, just use nearly horizontal drives with a rotary hammer. It may take 3 hours to break it up and twice that to clean it up. You will have a fairly thick space to build up when finished clearing the debris. This new sub must be very tight and secure to avoid shifting and squeeking. I'd use T&G plywood screwed and glued
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
     
    #5

    Aug 18, 2009, 04:37 PM

    I had no damage. Think I was lucky.

    Took me all day to do 150sq ft. Including clean up.

    Chuck

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tiling over a newly painted concrete subfloor [ 3 Answers ]

Thinking I was going to lay carpet, I mistakenly painted a concrete subfloor to keep the dust to a minimum. Now we decided to lay tile in front of my french doors. Is there an easy fix without scraping off the paint? Can wonerboard or durock be adhered over the concrete floor prior to tiling? If...

Installing toilet directly on concrete subfloor/slab [ 3 Answers ]

Living in a loft - going for that "loft" look and want to re-install my toilet directly onto the concrete slab (floor had ceramic tile before). Concerned that the flange will not be set low enough in current state - don't want gap between toilet base and floor obviously. Is there a type of flange...

Can I Pour Concrete Over Plywood Subfloor [ 2 Answers ]

I would like to put a concrete floor in my living room its on the first floor with only a small crawl space under it. It has a plywood subfloor that I would like to cover with a thin but durable layer of concrete that I can stamp and color.

Concrete subfloor wet from pipe burst - how long will it take to dry [ 2 Answers ]

I live on the top floor condo. A pipe burst on the roof of the building and the water went into my unit. The walls and floor got very wet. The water even went through to the unit below me and got their walls and floors very wet. A carpet guy came and pulled up my carpet and took out the wet...

Subfloor over concrete under shower base? [ 2 Answers ]

Hi, I am wondering if it is a good idea to put a subflloor over the basement concrete under the shower base or if I should just use mortar or even PL200 glue.


View more questions Search