Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Shower arm flange
[ 10 Answers ]
My carpenter made a mistake and cut the hole for the shower arm too large. I've been trying to find an oversize (3") shower arm flange to cover it but can't find one. Are there any suggestions as to how I can cover up this mistake.
Need assistance with shower flange that broke off
[ 2 Answers ]
Hi all: I was replacing the shower flanges that connect the water pipe in the wall to the shower head, and had to use some force to get it off. In the process, I broke off a part of the threaded flange in the pipe in the wall. I don't want to tear apart the wall. Any suggestions? FYI, I'm...
Toilet Flange
[ 2 Answers ]
Hi, I'm trying to replace my toilet in a house that I bought. When I removed the old toilet I found that the cast iron flange was rusted away with no way of actually securing the toilet to the flange. I removed the old flange by cutting and breaking it off (no damage to the drain pipe). I have...
Metal Flange on Stall Shower will not Unscrew
[ 6 Answers ]
We have a 25 year old two-story home. The stall shower on the second floor has been leaking onto the downstairs ceiling for about one year. My husband caulked the drain, etc. but it still leaks. Recently, he put his finger on the ceiling where the leak is and his finger went right through the...
Shower flange"cast iron"
[ 3 Answers ]
I have a stand alone shower on a slab foundation that leaked I pulled the floor out and the cast iron flange for the liner is in bad shape and needs to be replaced. How do I go about this and where do I get the parts. View more questions Search
|