Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Which wires should I use on my new thermostat?
[ 2 Answers ]
I had a Carrier builders non prog thermostat which controls my AC-heat (and air exchange) - The wires hooked in it were white in W, Yellow in Y, Green in G, Red in R and black in C. The orange and blue wires were not used. I purchased a Honeywell RTH4300B. I switch off the main breaker and...
Thermostat- only 4 wires
[ 1 Answers ]
I would like to know how to put in a new thermostat for an older house that only has 4 wires.
More wires than most At the thermostat
[ 1 Answers ]
OK, hers the deal. I installed a new digi thermo this summer. Everything worked fine. Now the heat won't come on. After reading this site I think I know why. I just can't figure out how to fix the problem. I need to put the old therm back. But I have more wires than I see listed anywhere or...
Thermostat Wires - Only 2 Wires (both black)
[ 4 Answers ]
Hi there, I'm switching my thermostat for a newer digital one, though when I took out the old thermostat, there were only 2 black wires with white stripes on them. The new thermostat calls for an RH wire and a W wire, but I have no way of distinguishing the two apart. How can I tell which wire...
Thermostat wires
[ 4 Answers ]
Our new puppy pulled the thermostat wires loose from the outside air conditioning unit. No damage to any wires, but I need to know which wire goes to which. From the inside, the wires are blue and yellow. The outside unit has brown and blue. Which to which? View more questions Search
|