Ask Experts Questions for FREE Help !
Ask
    DallasUser's Avatar
    DallasUser Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 5, 2009, 07:15 PM
    My Thermostat is blank - has no power
    I tried to reset the switch and nothing happened its still blank. What do I do next?
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #2

    Aug 5, 2009, 07:31 PM

    Does your thermostat use batteries for it's power? If so it could be that you have dead batteries.

    Otherwise it uses the 34 volts from the transformer and it is possible that your transformer is bad.

    Give me more information about your system and I will try to help you through it. Things like are you sure your door to the furnace is on and depressing the door switch. When you depress the door switch with your hand do you hear a click coming from the circuit board.

    Let me know.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #3

    Aug 5, 2009, 07:44 PM
    I`m sure letmetellu meant to type 24 volts
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #4

    Aug 5, 2009, 07:57 PM
    Quote Originally Posted by wmproop View Post
    I`m sure letmetellu meant to type 24 volts
    Thanks for spotting my goof, I am sure you understand that is the only one I have ever made.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #5

    Aug 5, 2009, 08:01 PM
    Wow,, I`m proud to have met you sir,, lol
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Flashing power light on monitor/screen blank [ 1 Answers ]

I have an hp pavilion computer and the monitor seems to be in sleep mode. The blue power light is blinking but the screen is blank and has been so for a couple of days. This has happened previously, but usually just when I first turned the computer on and after about 10-15 minutes.

Blank thermostat [ 6 Answers ]

Can anyone give me info on a huner 44660 series thermostat, I just installed it, and the unit is still not kicking on I followed the manual, any help much appreciated.

Thermostat that goes blank [ 6 Answers ]

We got Honeywell thermostat that goes blank, digital screen, while the heat is on. If we want to increase or decrease the level we have to push button several times and wait until the display comes on and then we can change the setting. Is the thermostat bad? Why it would go blank? :confused:

Thermostat went blank! [ 4 Answers ]

OK, a summary, Goodman/janitrol heat pump has been working well for 4 yrs. A couple of days ago, the thermostat went blank, with no power to the condenser or evaporator (no I haven't checked voltage yet). I assumed (sorry:() that it was the transformer, so replaced that. No avail. Still no...

Blank Thermostat [ 6 Answers ]

Hi Guys, I had the A/C unit running fine today... then all of a sudden my thermostat went blank... It was raining on and off today here in Plano, Texas... It is a Carrier A/C furnace unit, controlled by a Honeywell Thermostat... This thermostat gets its power from the unit itself... In the...

View more questions Search