Ask Experts Questions for FREE Help !
Ask
    bigdog02's Avatar
    bigdog02 Posts: 17, Reputation: 1
    New Member
    		  
    #1

    Aug 4, 2009, 10:21 AM
    1997 ford explorers emergency brake
    Where and how do you tighten emergency brake. It is the pedal type, not on console.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Aug 4, 2009, 11:38 AM

    Adjustment is likely under the rocker panel, on the driver's side of the vehicle. Should be super simple to do.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

95 Ford Brake Lights What Next? [ 2 Answers ]

95 Ford Explorer Brake Lights won't work. I have replaced bulbs, checked fuses (in dash and under hood) and checked brake pedal switch. The top brake light works as well as running ligts and turn signal lights. I do not have brake lights on either side. Please help, I have no idea what to do...

1997 Ford 7.3 Powerstroke is hard to start [ 1 Answers ]

My 1997 Ford F250 with a 7.3 Powerstroke is hard to start on colder mornings. If I cycle the glow plugs about 10 or 12 times it will start easily. If I plug in the block heater it takes fewer cycles to start. I've checked the glow plugs with a test light, they all have continuity. I've checked...

97 Grand Marquis emergency brake won't release [ 8 Answers ]

In my 97 grand marquis the last couple of days the emerg. Brake wouldn't release when I shifted into drive nor with a pull of the release lever, only after driving a mile or so. Could this be due to the sub-20° temperature or something else. Also, is there another way to release it manually?

Emergency Brake light stays on after brake is realeased [ 3 Answers ]

What would cause the emergancy brake light to stay on after the emergancy brake has been released on my 2002 Ford Explorer?

Ford brake light [ 1 Answers ]

My ford explorers brake lights stay on unless I disconnect the battery, is this a sensor and where is it so I can replace it

View more questions Search