Ask Experts Questions for FREE Help !
Ask
    norweaver's Avatar
    norweaver Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 28, 2006, 08:58 PM
    Hampton Bay Ceiling Fan
    I have a Hampton Bay fan installed a couple of years ago. Right after installation, one of the metal clips which hold the glass over the bulb on, fell off. The glass is now teetering such that we are afraid to run the fan. Since installation, more of them have fallen off. Does anyone have ideas to repair this fan? I would love to actually USE it. Thanks.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Oct 29, 2006, 01:05 AM
    I'm sorry to say that there is no known easy fix for these clips, I've heard of many stories of them breaking and glass falling.. . You can try to contact Hampton Bay for replacement parts.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan-light works-fan doesn't [ 6 Answers ]

I installed a new Hampton Bay ceiling fan outdoors and the light works from a wall switch but the fan doesn't work at all. There is a white, black, red and ground wire coming from the ceiling. There is a white, black, black/white stripe (light) and green ground coming from the fan. I attached...

Hampton Bay ceiling fan light fixture stopped working but fan still works why? [ 14 Answers ]

New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:

Hampton bay ceiling fan lights & fan not operating [ 17 Answers ]

Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Hampton Bay ceiling fan [ 3 Answers ]

I have a Hampton bay ceiling fan w/ remote. A light burned out and I heard a "popping" noise which I assumed was the bulb burning out. HOwever, the remote no longer works the lights. It does work the fan, just not the lights. I have replaced the bulbs, but still no remote operation of the...

View more questions Search