 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
'98 honda accord
I have a 1998 Honda Accord LX. It has a hammer vibration at 60 mph and up. I already changed the ball joint, wheel bearing, bushing, cv joint, and tie-rod 1 year ago. But it does the same thing.
Could this affect the wheel balance or alignment. If anyone can help, please answer. Thanks. |
||||
|
||||
|
Check your tires for wear and balancing. There may be unusual wear, due to worn struts, that shows up at that speed. When struts are replaced, it's best to do all of them at the same time. Otherwise, the old struts can ruin tires, for instance, that are on the rear that are then rotated to the front. It's equally possible the tires just need to be dynamically (computer) balanced. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Would someone be able to tell me if the wheels on an 1986 Honda Accord are interchangeable with those of a 1996 Honda Accord. Thank you
:)-----My Honda has a few problems... It was idling up and down on startup if I drove off right away. It would idle like this for a bit and then stop. Now it won't stop... It dies out at lights if I don't keep my foot on the gas a little. I turned up the idle but still no help.. filled up the...
What would causing sparks to shoot from my starter. At times I would go in the store and if the car was not off long enough it would make me wait for a while before it would start. While I was driving down the road it just died. After a long while I would get it to start but when I put it in drive...
I got a 1992 honda accord and would like to put a 1996 honda accord engine and trans in it. Would it be possibly.
Help me!! I have old Honda Accord 1980, I want to upgrade it to Honda Accord 2003 step by step. I do not much money right now. Please Help me about this, which parts one by one I must change. Thanks
View more questions Search
|
