Ask Experts Questions for FREE Help !
Ask
    emaasjr's Avatar
    emaasjr Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jul 29, 2009, 09:01 AM
    Replacing tub faucet spout
    Going to replace tub spout since pullup diverter to shower works poorly. This is a slip on spout and my question is,
    Should any caulk or other waterproofing be applied to the pipe before slipping on? The instructions don't address this but the home depot person made reference to caulking.
    Thanks, Ed Maas
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #2

    Jul 29, 2009, 09:17 AM

    Before you install a new tub spout check the pipe end that has no sharp edge remove if any, also use some silicone jell on the O-Ring, Thanks.

    John
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #3

    Jul 29, 2009, 09:52 AM

    The person at Home Depot was probably referring to some caulk on the back of the spout where it fits against the wall. This would be a good idea.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    Jul 29, 2009, 10:02 AM

    Both great responses, caulk where the spout meets the wall but nothing other than silicon grease on the O ring and pipe.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing Tub Spout [ 4 Answers ]

I need to replace my tub spout, because my diverter stopped working so well. I unscrewed the old one, and there's 3-1/2" of copper pipe with a threaded end sticking out of the wall. I went to Home Depot and bought a "universal" replacement spout which doesn't fit. The pipe is not long enough. ...

Replacing tub spout [ 2 Answers ]

I am trying to replace a tub spout, but cannot take old one off. The spout does not have a screw on the bottom. How can I take this spout off?

Replacing tub spout [ 4 Answers ]

I have a slip-on spout where the diverter does not work anymore. It must either stay "up" for the shower or "down" for the tub. The diverter is on the spout. I removed the spout and took it to a hardware store to purchase a new one. I followed the instructions and installed the new spout. I...

Need help replacing tub spout [ 6 Answers ]

Okay, my husband and I are not the handiest people in the world. We needed to replace a tub spout with diverter, as water was not coming out of the shower head. We bought a universal tub spout with diverter, the kind with a thread screw and retainer ring. We followed the directions to a T, and...

View more questions Search