Ask Experts Questions for FREE Help !
Ask
    jrone73's Avatar
    jrone73 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 28, 2009, 04:46 PM
    Converting bryant p271-3457 thermostat to hunter model42995b
    I have a 8 wire bryant thermostat model p271-3457 that I want to convert to a hunter model 42995b but it only has a five wire diagram
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jul 28, 2009, 08:59 PM
    Wrong tstat,, from what I`m finding the 42995b isn`t compatablefor heatpump use
    When you take it back,, pay a little more and get a honeywell,, hunters are junk,you would be very lucky if it lasts 3 months
    siberianair's Avatar
    siberianair Posts: 360, Reputation: -4
    Full Member
    		  
    #3

    Jul 29, 2009, 02:49 AM

    I agree with wmprop
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring codes from old Carrier thermostat to new Hunter thermostat [ 1 Answers ]

WIRING CODE HELP FOR THERMOSTAT I am in an office and have an old Carrier programmable thermostat which no longer works. I purchased a Hunter 44660 thermostat to replace. My problem is that the wiring codes on the previous thermostat do not match up the codes on the new thermostat. Codes and...

Hunter thermostat compatibility with Bryant Furnace [ 6 Answers ]

Hello. I have had a Hunter Auto Saver 550 7-day programmable thermostat for several years and recently had my furnace replaced with a Bryant 345MAV. Since the furnace replacement, my heating bills are very high - even compared to the stay-at-home neighbor with the new baby! At the last HVAC...

Converting from RUUD to Hunter 44155c thermostat [ 4 Answers ]

Hi there, I'm sure this has come up before, but I can't seem to find a specific answer that I can use. I am trying to change tstats form a RUUD with 6 wires (one jumpered) to a Hunter 44155c that has different markers for the connections. RUUD tstat was wired Red-R, Blue-B, Green to G, Yellow-Y,...

Converting a Carrier Thermostat to a Hunter Model 44860 [ 3 Answers ]

I currently have a basic contractor installed Carrier thermostat (non-programmable). We wanted to upgrade to a programmable. I went with Lux at first and had to call the tech support, only to have them call back and tell me that my system wasn't compatible. Anyway, here is my current make up on...

Bryant furnace to a Hunter programmable thermostat [ 1 Answers ]

I am trying to hook up a programmable hunter thermostat model # 44360 to a bryant system and heat pump, I have 6 wires coming out of the wall one green, red, orange, blue, yellow and white, the hunter thermostatha g, rc, rh, y/o, w/b, and y1 can any body tell me what goes where? Jmt

View more questions Search