Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Residential Service Cable Type
[ 11 Answers ]
Once again, a res. Question by a comm. Electrician. I have a new project relocating a meter service. The new meter will be about 25 feet from the 200A panelbox location instead of back to back. I'll wire in a 200A 2 pole breaker at the meter location as per 10 foot tap rule, and run new cable to...
TV Cable ripped off the back panel.
[ 6 Answers ]
Does anyone know how to fix that. Or if not anyone that I could call in Denver, CO?
Subpanel Cable type
[ 1 Answers ]
I need to install a 60amp sub panel. I will be running the feeder cable in Schedule 80 PVC. The run is 100 feet long, I want to use 2 gauge SE Quadruplex type RHW-2. Is this cable OK or should I be looking at something else. I want to be able to use it for 100 amps in the future.
Using Aluminum Cable for 100 Sub Panel
[ 2 Answers ]
I'm going to be installing a 100A sub panel in my garage and need about 125 feet of cable. The price of aluminum is about 1/3 of copper so I'm just wondering what needs to be done differently when installing aluminum vs copper? Is it worth the hassel and/or risk? Thanks in adance! Pete View more questions Search
|