Check out some similar questions!
Installing laminate flooring on stairs-overhang not tall enough
[ 2 Answers ]
When attempting to install laminate flooring on our stairs, my husband and I have found that the stair bull nose dose not completely cover the underlying stair. The step is 3/4'” while the bull nose is 3/8”, leaving 3/8” showing. One person suggested that we cut down the part of the step that is...
Installing Hardwood Flooring
[ 4 Answers ]
We had a flood in February, due to a broken water pipe in the kitchen that seeped water into the living room area, and ruined our hardwood floor. After long discussions with the insurance company the job was given to replace the complete floor. It was replaced with Mannington Jamestown engineered...
Installing tile over vinyl flooring?
[ 3 Answers ]
I have installed ceramic, porcelain, and natural stone tile previously. In those cases, I also installed the underlayment, using 3/4" plywood (glued and screwed) and then 1/4" cement board (thin-set mortar and screwed). I am now considering another tiling project in our bathroom. I was...
Installing self adhesive tile flooring
[ 8 Answers ]
Hey guys, quick question. I'm going to install self-adhesive tile flooring in our bathroom. I was going to put either a plywood or luan subflooring first then apply the tiles. I was wondering when I nail the subfloor down, do I use anything to cover the nails and any gaps in between the sheets of...
Installing nail down flooring over oak parquet
[ 1 Answers ]
Hi there! My house currently has 3/4 or 5/8" thick, 1ft x 1ft oak parquet flooring over slab. The problem is that all around the exterior perimeter walls, there is severe termite damage, to the poitn where it is almost veneer! I want to install new flooring. I was going to rip up all the... View more questions Search
Add your answer here.
|