Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Changed out radiator w/copper supply baseboard w/ pex supply
[ 2 Answers ]
And there is no heat in eminating from this baseboard. This was done in one room only and off the original radiator line.the system is all hotwater radiator w/the exception of this one room. We did not change the original heating supply line to this but added valves and then the pex. Seems the hot...
Pex tubing and water supply
[ 6 Answers ]
Hi. I am building a new house, slab on grade. I am trying doing a lot of the work myself. I want to install the water lines under the concrete. What I am wondering is: with pex tubing, can I run a line to (example)one faucet, T in a connector, (above grade) and continue on, back under the slab,to...
What size copper tubing should be used for shower hot or cold water?
[ 6 Answers ]
I'm installing a shower in my finished basement and noticed some lines were 1/2" and some 3/4". What size is best to use for the shower for good water flow? Also, are solder joint valves better or threaded? Gate valve or ball valve? Thanks, Dave
Plastic or copper for outside water supply?
[ 14 Answers ]
I live in cold winter climate. I want to run water from inside the house to outside for watering in summer. I have black HDPE to a brass valve, then connecting to 3/4 PEX to service the house. As per the picture, I want to tee in and run 1" cold water outside to connect to a watering system. The...
Whole house water supply copper to cpvc
[ 2 Answers ]
I recently bought a house with a private well . The previous owner never had any type of water treatment or filter system on the water supply. Because of this all the 1/2" copper tube is lined with sediment and sludge restricting the flow to all faucets and outlets. There is already some 3/4" cpvc... View more questions Search
|