Ask Experts Questions for FREE Help !
Ask
    joe645's Avatar
    joe645 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jul 6, 2009, 12:14 PM
    Add 110 circuit
    I have a 220 circuit (breaker box) for a SPA. Can I run a 110 circuit from the 220 input?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jul 6, 2009, 12:23 PM

    Do you have a neutral in that breaker box?
    joe645's Avatar
    joe645 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jul 7, 2009, 09:52 AM
    Wire colors are Red, Black, White and Ground.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #4

    Jul 8, 2009, 06:16 AM

    Please explain how you intend to use this 120 VAC circuit. Also, are you removing the 240 VAC circuit for the Spa or tapping a 120 VAC circuit off it?
    joe645's Avatar
    joe645 Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Jul 10, 2009, 01:00 PM
    Thanks for the help, I found a unused 50amp circuit in main box. I will use that and leave existing 110 alone.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can circuit work well if we connect 12A load to 20A circuit? [ 5 Answers ]

Hello: I have several equipment which are around 12A. I just can connect them to 20A circuit. But I am not sure if circuit will trip well under overload and short circuit. I know 15A is perfect.But,I don't have 15A circuit Thanks for everybody.

One circuit knocking out power to another circuit [ 2 Answers ]

I have a 3 wire grounded Romex cable connected to 2 circuit breakers by sending one black to a breaker and one red to another circuit breaker. They lead back to the kitchen wall where one gives power to the garbage disposal and the other gives power to the dishwasher. Both have GFCI protectors on...

Converting 240v circuit to a 110v circuit [ 6 Answers ]

I have a 240 circuit, to make it a 110 circuit. I need to remove one of the hot wires?

Converting 15 anp circuit into 20 amp circuit [ 1 Answers ]

I just bought a treadmill. The problem is it doesn't work where I want it to. It can only run on 20 amps but all my outlets use 15 amps. It keeps tripping the breaker. Can I easily convert my outlet to a 20 amp?

Outside GFI circuit - 15amp outlet on 20amp circuit [ 1 Answers ]

I need a better understanding of what I should do when setting up my new outdoor circuit. I've got a circuit that runs about 150 feet, so I'm installing 10g wire to allow for the voltage drop. I read in the Home Depot Electrical 123 book that I can have at most a 15amp circuit with 10g wire on...

View more questions Search