Ask Experts Questions for FREE Help !
Ask
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #1

    Jul 8, 2009, 08:16 AM
    50 Amp Generator Power Cord?
    I'm having a Tough time finding a 50', and a 25 foot Power cord for a Generator.
    Generator Has 50 Amp 4 Prong Twist lock, and the Power inlet has 3 prong twist lock with the center pin(California Style). Any Ideas, Local suppliers cannot find.
    Also have a tough time finding a Square D QOT 3030 Breaker(2 pole tandem 30)
    Thanks for any responses.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Jul 8, 2009, 08:34 AM

    A used breaker: QOT23030 Square D - All Breakers, Inc.

    This is why you can't find one: http://www.squared.com/us/misc/faqIn...ight=0,QOT2020

    I have this "search knack".

    What's the NEMA designations for the genset cords.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #3

    Jul 8, 2009, 09:19 AM

    Will these work?

    The CS6364 connector has the center pin. See the user manual and Google the connector designation.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #4

    Jul 8, 2009, 09:20 AM

    Will these work?

    The CS6364 connector has the center pin. See the user manual and Google the connector designation.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #5

    Jul 8, 2009, 10:56 AM

    I'm a search Maniac Myself, I had called Square D, and they say it is discontinued. Then I tried some Breaker sites and No Luck. Someone has one. Still Looking, Thanks
    That is the connector I need at 1 end, with a L1450 Male to go in the Generator, and would prefer made up cords instead of parts. Will if I have too. Better protected from water. Thanks again.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

3-prong generator & 4-prong power cord [ 11 Answers ]

My 5kw Coleman Powermate generator has two 110v receptacles and two 220v receptacles. Both of the 220v receptacles are the 3-prong blade type. My six circuit Reliance ProTran transfer switch has the 4 prong female twist lock. Both ends of my 30amp 4-wire cord are twist lock. The end for the...

OK to shorten power cord? [ 1 Answers ]

Prob a silly question but we have 16 CCTV cameras. All have 4 foot line from "wall wart" to power connection on siamese cable, would it hurt anything to shorten the power line to only 1 foot? ( shorten by cut & splice) Thanks K

New power cord for bass amp [ 1 Answers ]

I have a old bass amp with a 2-conductor cord & plug. Lately, I've been working in a basement studio & I've been getting shocks if I touch the microphone while I'm playing. Would changing to more modern 3-conductor power cable solve this problem? If so, how to I attach the third (ground) wire to...

Long power cord [ 4 Answers ]

OK you can't leave an extension cord in place over 90 days. So as long as the wire size is OK for the load at that length, can I buy a 20' one, cut the end off and hardwire it in as a 20' power cord? I am talking a motorized screen for in a church. The directions say 14-18 wire. I should be...

View more questions Search