Ask Experts Questions for FREE Help !
Ask
    JamesX's Avatar
    JamesX Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 7, 2009, 09:20 AM
    Bathroom Fan Wiring
    I am replacing a bathroom vent fan. The fan I replaced had four wires: white, black, blue and ground. The home wiring has four wires(14/3): black, white, red and ground. My new fan a Harbor Breeze made by Hunter Fan has a switch box with a two pin connectors. Each has a black and white wire.

    How do I connect the 14/3 to the new fans wiring set?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jul 7, 2009, 02:54 PM

    Did either fan have a light, blue is generally for the light fixture of a fan.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

GFI bathroom wiring [ 11 Answers ]

I am in the process of remodeling an older bathroom (1965) and had a question regarding the wiring. From the single switch box where the feed from the circuit breaker comes in there is a 12/3 circuit going to the ceiling fan/light. There is also a 12/2 going to the vanity light. Can I change the...

Bathroom wiring [ 3 Answers ]

I have power coming to a new bathroom and need to put in a gfi outlet,a ventilation fan,some lights and a jetted tub. Please draw me a schematic of how this should be done.If I need another line coming in please show where to take this power from. I would like a switch to control the vent fan and...

Bathroom fan wiring [ 3 Answers ]

I am finishing a basement 3/4 bath. I have run a separate 20 amp (12g) circuit from panel to GFI outlet in bathroom. From that I want to run to bathroom fan. Can I run to fan and then to switch for the fan or do I HAVE to run the wire to the switch and then the fan - I have been told I must go...

Bathroom wiring [ 1 Answers ]

I am wiring an elecric towel rail & blanket underfloor heating in a bathroom, I know this has to be done to IEE standards trough a flex outlet & an external fused connection unit. I just looking for conformation on what height I should put the flex out let in the bathroom. I am in Scotland, I...

Bathroom wiring [ 2 Answers ]

First question was answered somewhat,here's the scenario,remodeling bathroom,ran 20 amp service,wired in fan/light .light is wired for use by itself.Fan,light in tub,shower,vanity light and three outlets [one outlet is gfci,20 amp rating. Would like to use 15 amp switch for general light,this is in...

View more questions Search