Ask Experts Questions for FREE Help !
Ask
    booksin's Avatar
    booksin Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 29, 2009, 02:45 PM
    Price Pfister Bath/shower valve
    My price Pfister bath/shower valve has a slight leak. I can't find any identifying model numbers on it. It is at least 30 years old. How do I determine replacement parts before I take the valve apart to replace the washers or the entire valve?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Jun 29, 2009, 06:56 PM
    Hi Booksin...

    Your best bet will probably be to remove the parts and take the washers, etc. down to a local HOME DEPOT as they stock most common Price-Pfister repair parts.

    Let me know if you want to discuss more...

    MARK
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Price Pfister valve repair [ 2 Answers ]

I am attempting to stop a leaky hot water faucet model 48-DC00. I have taken the handle off and removed the valve assembly. Now what? There is a small O-ring that apears to be OK but the ceramic, (or plastic) part in the middle does not look good. Maybe there is no alternative but to purchase a...

Changing the valve in a Price Pfister single knob shower control [ 1 Answers ]

I was trying to replace a leaky valve in a price Pfister shower control knob but can't figure out how to remove the old valve. Is there a special tool for this? Thanks

Price Pfister shower balance valve leaks [ 2 Answers ]

Help, my Price Pfister shower pressure balance valve leaks up through the shower head when turned off. I replaced the cartridge and it still leaks. It almost stops leaking right after a shower, but over a couple hours it drips about once every second. If I turn on another faucet in the house...

Single price pfister stem valve [ 2 Answers ]

I have a Single turn knob for my shower made By Price Pfister. The valve needs replacing. Removing the knob and un-screwing the metal Circular cylinder, I’m left with the stem valve. From the front, It is circular with two tabs, one On top and bottom. With a screw driver from the Back tabs,...

Tub/ shower leaking. Price Pfister valve question. [ 4 Answers ]

Hi! We have an old Price Pfister Tub and shower faucet. It has been dripping for some time now and I would like to replace the whole thing with something newer anyway. If at all possible I would like to do it myself. I have been doing some research and have found that the new OX8 valves have a...

View more questions Search