Ask Experts Questions for FREE Help !
Ask
    dill1pickle's Avatar
    dill1pickle Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 26, 2009, 05:29 PM
    Trouble installing fan motor
    Purchase a new outside fan motor new one has 4 wires instead of only 3 also came with a small cap not shure what to do with it
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Jun 26, 2009, 05:31 PM

    Hook the 2 brown wires to the small capacitor then the other 2 wires will hook up where you took off the 2 on the old motor. The old capacitor will not be used for the fan. Just the compressor
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trouble installing honeywell thermostat [ 6 Answers ]

I have a very old thermosat that has six wires hooked up to it now. It is labeled 2-white wire 0-brown wire B-blue wire R-red wire Y-yellow wire G-green wire The honey well thermostat I bought has 5 connections Rh, Rc, W, Y, G with it only having 5 and my current has 6 is this thermostat...

Installing a A/C condenser motor [ 1 Answers ]

I am replacing a defective A/C condenser motor (K55HXMHS6410) which has three wires coming from the motor (yellow, black, and brown). The new motor I am trying to reinstall is a 554 outdoor condenser fan motor which has a black, white, brown/white, brown and red wire. How do I reinstall the new...

Installing New condenser Fan Motor [ 2 Answers ]

My Exterior condenser fan motor just went out. It is a 17 yr old York. The motor is a 1/4 HP, 208-230V 1.4Amp. I have looked around and an exact match cannot be found. The folks at the supply store have a 1/4 HP motor of the same voltage but 1.5 amps. They told me the amperage difference was...

Ack! Trouble re-installing Access 97 on XP [ 4 Answers ]

:confused: My PC is running XP Media. I had Access 97 installed on the PC but it was really buggy. Had an increasing number of errors just opening files. So this AM I uninstalled the software and then tried to reinstall it (97). I have a full copy, not an upgrade copy, but it still said it...

Trouble Installing System File [ 2 Answers ]

My motherboard CD will no longer install monitoring information. A dialogue box pops up with the header: 16 bit Windows Subsystem The message reads: C:\Windows\System32\autoexec.nt "The system file is not suitable for running MS-DOS and Microsoft Window Applications. Choose 'Close' to...

View more questions Search