Ask Experts Questions for FREE Help !
Ask
    clarkdsn's Avatar
    clarkdsn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 23, 2009, 07:49 PM
    17.5 Kohler Command problems
    Model : CV491S Serial :3421303773
    Starts and runs for seconds and shuts off,fuel sort of fills in the bottom of breather throat at choke when that happens I am able to start it ,and runs till its gone. Fresh gas,and gas is going to carb.cleaned carb,could it be the fuel pump not pumping the right amount of fuel to keep it running.How to check full pump is working proper?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jun 23, 2009, 07:58 PM

    Hi,
    Could be the fuel pump. Disconnect the hose at carb, and probably bes to take out plug. Turn engine over and, it does not really matter whether vacuum or mechanical, it should shoot out a strong pulse of gas from hose.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Command line is telling that "javac" is no internal or external command [ 1 Answers ]

Hi fellow I have just started java , my operating system is windows vista , I have installed java but when I give "javac" command on command line after writng the code in note pad the command line gives an error that javac is not an internal or exetrnal command... if any 1 can help ...

16hp kohler command [ 5 Answers ]

My 16hp kohler shuts down after a few minutes of running. Fuel system has been checked. Carb. Has been cleaned. Oil at correct level, air filter clean. Any help would be appreciated. Thanks Bart

Run Command Error when trying to execute a command [ 4 Answers ]

I just had my laptop re-imaged with a new Updated Windows XP CD running SP3, however, When I go to START | RUN It does not matter if I type in a Server name on the network or just CMD. I get the message below and it will not execute. Is there something I can do to fix this? “This file does not...

Kohler firing problems [ 1 Answers ]

OK I am a mechanic I have unhooked kill wire from magneto.flywheel key and magnets are fine and clean.. air gap is 10 and I have no fire. I performed three test with multimeter test 1 ohms between bolts on coil and negative terminal of battery.. it has 0 ohms... test 2 from spark plug wire to bolts...

Star Trek: Starfleet Command Gold Edition Problems [ 8 Answers ]

I have downloaded this game, upgraded sound and video cards and drivers, have downgraded from WIN 2000 Professional to WIN ME, have downloaded December 2005 DirectX update, and this game will still crash when I try to run it. Before I downgraded from 2000 pro to ME, it would say; "DirectX init....

View more questions Search