Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New Bath & Shower Fixtures
[ 2 Answers ]
I had a new shower/bath area built and plumbed quite some time ago. I have finished tiling and an ready to have the shower nozzle, hot/cold knobs, and bath faucet installed. I was just told the pipes that were installed must match the brand of fixture. Is this right? I have no idea what the...
Help with bath/ shower on slab
[ 1 Answers ]
My wife and I are considering installing a Sterling brand two piece tub w/ shower enclosure in our full bath. Here's why when we purchased our home last Nov.of 2005 we did not notice the last owner had altered the bathing area. What he did was remove the tub spout and had a make shift cheap...
Standing Shower Drain Leaks
[ 3 Answers ]
Hi: I read few articles about how to fix the shower drain leaks. I guess some experts suggested to use WingTite. I think the rubber gasket and the threaded top cover is what is causing the leak. The threaded holder seems a bit bigger than the hole of the shower drain itself and I don't know how...
Lukewarm bath/shower
[ 2 Answers ]
Hi, My bath/shower has only had lukewarm water for the past couple of weeks and it is driving me crazy. The rest of the house has hot water (very hot -- I turned up the hot water heater's temperature to nearly 140 degrees) including the sink in the same bathroom as the bath/shower that only...
No pressure in master bath shower
[ 1 Answers ]
In the master bath shower we have very little pressure but in the other bath there is lots of pressure. The fixtures in the shower are old could this be the problem. HELP!! View more questions Search
|