Ask Experts Questions for FREE Help !
Ask
    BroDawson's Avatar
    BroDawson Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 14, 2009, 11:20 AM
    Troubleshooting Control Board of a Luxaire
    The fuse keep blowing out in the control board
    Perito's Avatar
    Perito Posts: 3,139, Reputation: 150
    Ultra Member
    		  
    #2

    Jun 14, 2009, 11:48 AM

    Fuses blow because some component, somewhere, is drawing more current than it should. It may be a problem on the control board, or it may be a problem on something being driven from the control board. Without more information, it's impossible to say.
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #3

    Jun 14, 2009, 01:05 PM

    Does it only do this when you have the ac on? If so you probably have a bad contactor outside.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troubleshooting luxaire heating and air [ 12 Answers ]

Our furnace will not come on all the time. When it does it makes a humming sound outside and nothing happens. We tried changing the thermostat,but, that doesn't work. If by some small chance that it does come on with warm air it won't last long. Can you give me something to try. I can't afford a...

Bad control board [ 13 Answers ]

We have an older Trane gas furnace (TUC series) and the control board went bad (model 50e47-060). The furnace would come on, but there was no signal to the ignitor per the technician who wanted to charge almost $1K to replace the control board. With money being so tight, we purchased a new board on...

Control board replacement [ 2 Answers ]

I am replacing a control board in a bryant 395cav heater the old one was missing, perhaps taken by the last resident, anyhow, I got a new ceso110057-02 fixed speed furnace control replacement kit but have no idea which wires connect to which spade plugs on the board, I hope someone can enlighten me...

Control board [ 4 Answers ]

I'm working on a forced hot air furnace that's in a basement that got flooded and the furnace was only on 2-4 so it looks like the whole blower motor and control board transformer got flooded. I responded to a no heat call today check the unit the unit won't do nothing, it has power coming from...

Control board [ 1 Answers ]

My control board seems to not be working the light won't come on it is a goodman 90% furnace I do not have the home owners book for it

View more questions Search