Ask Experts Questions for FREE Help !
Ask
    nancycmanning's Avatar
    nancycmanning Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 8, 2009, 10:55 PM
    Thermostat malfunction
    hi My thermostat has been replaced 4 times and zone valve serviced, but heat in my ap tiartment goes on and off at random. It's an old concrete building with reverse thermostat system. Heating guys are baffled. I only have one zone valve in my apartment and it seems to be new and working. So far thermostat has been replaced 3 times and nothing seems to help. Any ideas? Suite did have a burst pipe about 4 months ago before I bought the place that was fixed by restoration company. Could they have srewed something up? Problems started after burst pipe was fixed. (I think). Thanks
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jun 9, 2009, 12:42 AM
    Brand and model number of the thermostat being used now.
    Brand and model of the zone valve being used now.
    Without complete information it is near impossible to provide any assistance.

    Note part numbers/brand/model numbers and names will all be on your bills from the HVAC companys.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is her malfunction? [ 20 Answers ]

Ok- I have a 17 year old child who is beyond bright and very strong willed. She's a junior in high school. All of her teachers love her. She has unfortunately inherited my families disposition for migraines. We have her on a 504 plan to cover the days that she is out due to her legitimate...

VARIABLY high thermostat readings; location NOT an issue; malfunction or miswired? [ 4 Answers ]

I just installed a new digital thermostat (HoneywellRTH230B) and I'm trying to figure out if it is malfunctioning, needs to be calibrated (if that's possible), or if I wired it backwards (if that's possible). This is a simple 24-volt 2-wire installation; thermostat is connected to the transformer...

A/c thermostat malfunction [ 1 Answers ]

It is a RobertShaw 9600- Setting is for MANUAL Temperature in house is 76 degrees Manual setting for a/c to come on is 79 degrees. A/C comes on. A/C installer told us thermostat unit is BAD. Sold us a replacement.

Fan Malfunction [ 3 Answers ]

Recently installed 3 speed, ceiling fan with light worked properly for about 6 weeks. Now fan only works on one speed and slows when light is turned on. What might be causing the malfunctioning?

My PC malfunction [ 2 Answers ]

Why is it that when I use my PC my computer says vga no signal?? Wats does vga mean?? :confused:

View more questions Search