[AFRA2000]

I bought rain shower head and I'm afraid to install it because it too heavy I think will fall down in future during use pleas advice me

[ballengerb1]

If you have a standard shower arm coming out of the wall you should be fine. If you have something unusual please tell us more or attach a pic.

[speedball1]

I bought rain shower head and i'm afraid to install it because it too heavy i think will fall down in future during use pleas advice me

I wouldn't worry too much. Your shower arm's secured by two screws through a drop eared ell,(see image) into 2 X 4 backing.
Besides, I just put one in my shower and it hasn't fallen yet. Happy rub-a-dub! Tom

[Milo Dolezal]

They actually sell a flange that goes around shower are that has 2 screws. You attach the flange to the wall. This helps to support shower arm.

Most of the time, Rain Shower head installs on the ceiling. Is your on the ceiling or wall ?

[AFRA2000]

In a ceiling


This is the pic

[Milo Dolezal]

If it is in the ceiling that don't worry about it at all. You are fine. If it was on the wall, than you could have a problem with weight. Just install it and enjoy it...

[massplumber2008]

Hey Afra2000...

That looks like a kohler shower head and there should be a template that comes with it to pipe it up correctly. You will need (4) 3/4" copper x 1/2" female tee fittings and some 3/4" copper street 90s. The instructions also describe EXACTLY how to hang this shower head system as it is quite heavy with all the fittings and piping required.

If this is not a kohler shower head let us know the name brand so we can advise better... ;)

Check out the included instructions... let us know if you have any more questions.

MARK

[Milo Dolezal]

Hey Mark, this is Kohler Watertile Rain Shower "Panel":