Ask Experts Questions for FREE Help !
Ask
    kingdomforaname's Avatar
    kingdomforaname Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 1, 2009, 09:45 PM
    Whirpool Ultimate Care II Dryer
    When you push the start button, it won't go on, all it does is click when you push it. It has power. Please help! Model # LEQ9508PW1
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jun 2, 2009, 12:09 AM
    There is a good possibility of a motor relay being located in the top control console. Test it first and replace if defective. There are also other parts that could be defective like the door switch for example that will prevent the unit from starting if defective. Always test parts before replacing to prevent unnecessary expense.

    Example of parts layout for your unit.


    Replacement parts for WHIRLPOOL LEQ9508PW1 | AppliancePartsPros.com
    mudhen30's Avatar
    mudhen30 Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Jun 5, 2009, 10:49 AM

    We are experiencing the same problem with our Whirlpool Cabrio WED6400SW1. I am concerned on how much money I am going to fork out tomorrow when the service man comes.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Jun 5, 2009, 12:12 PM
    You will find out the cost tomorrow. This is because different areas charge different labor and parts markup.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Ultimate Care II washer will not drain [ 13 Answers ]

The washer runs through the wash cycle but when it is suppose to drain it does nothing. There is no hum just dead. I drained the tub out and disconnected the hose from the back thinking the drain was plugged. But when I did this the rest of the water from the tub drain out no problem. I'm...

Whirlpool Ultimate Care II Washer will not spin [ 1 Answers ]

Washer completes wash cycle but when it gets ready to spin it doesn't do anything. I don't believe it is the lid. How do I take off the back panel to possibly correct the problem.

Whirlpool Ultimate Care II LSQ9010PW6 [ 1 Answers ]

Hi I am trying to find out what could be cause my washer to be draining its water during the agitate period. When it is suppose to be shaking and washing the clothes it is draining the water and by half way through the agitate process there is no water left in the washer. What could be causing...

Whirlpool Washer Ultimate Care II [ 1 Answers ]

Our Whirlpool washer has developed a strong, musty odor. We think it is coming out of the hole in the agitator. Can the agitator be taken off? What could be making a strong smell? I have tried running clorox through, and it doesn't seem to help. Thanks

Whirlpool Ultimate Care AL5143VW0 stalls [ 2 Answers ]

My Whirlpool will fill and agitate then stall before it drains and spins. It is so frustrating to go switch clothes to the dryer and the washer is still full of water. This happens most of the time on the first spin sometimes on the second spin and sometimes not at all. I am going to replace the...

View more questions Search