Ask Experts Questions for FREE Help !
Ask
    hjm's Avatar
    hjm Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 27, 2009, 07:12 PM
    No power in my 17 hp briggs after about 20 minutes
    My john deere lawn tractor with 17 hp briggs is flooding badly after mowing fot 15 or 20 of mowing
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    May 27, 2009, 07:31 PM

    Remove the bowl and clean the needle and the seat on the carb, consider replacing both if cleaning doesn't do it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2005 Chevy Tahoe Passenger Power Windows and Both Power Seats not Working [ 3 Answers ]

I have a 2005 Chevy Tahoe. The passenger side windows stopped working and both passenger and driver power seats stopped working. All of this happened at the same time. I saw this same problem posted by another user back in January but I didn't see a clear answer. Does anybody know how to fix...

Engine switch V twin briggs for Briggs intek ohc [ 2 Answers ]

I would like to exchange a 19 hp V Twin into a Craftsman lt 2000 mower. It was originally equipped with a 22 hp Intek V OHC. I am wondering how different the wiring is going to be. Also is this possible? The 19 HP twin is Model 42A777 Type 1236 01. The Intek is Model 407777 Type 0174 E1 Thank...

18hp Briggs Intek - Looses Power Under Load [ 1 Answers ]

I have a Craftsman L/T 2000 Mower with the B/S 18hp Intek. The engine runs smooth at all throttle positions including full when it is just running. When you start to cut 5" to 6" inch grass the engine seems to loose power. It still runs smooth but full throttle is only at about half, and the mower...

Muffler turns red hot, and lack of power 18.5 briggs [ 2 Answers ]

I have a craftsman 18.5 intek plus model 31p777/ type 0348e1/code 010406ze. It had a bent rod when i got it and found the valve was stuck solid. I reused the valves and ground and seated them and set intake at .004 and exhaust at .009, i also replaced the key at flywheel.it starts but has low power...

Briggs Engine Has little power [ 3 Answers ]

I have a 16HP Briggs engine on a Roper Lawn Tractor, It will run OK when just traveling, but if I engage the deck, it dies. What is the best next coarse of action.

View more questions Search