Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Framing walls in basement
[ 2 Answers ]
I will be framing "floating" walls in my basement using 2x4's. Framing a wall perpendicular to the "engineered" floor joist is not problem, but how do I handle a wall that runs parallel to the floor joist and is located between the joist, not directly on a joist? Keep in mind this is an engineered...
Inulating basement walls
[ 6 Answers ]
Hi everyone, I found many useful informations here while working on my projects. I'm finishing my basement.. the Concrete wall is almost 9' high all the way around. The wall is insulated 1/2 way by the builder with a plastic wrap all the way around. I have framed the walls by 2"x4" wood with...
Basement Walls
[ 3 Answers ]
I'm finishing my basement and have conflicting advice on how to wall the floating frame. In the bathroom I would like the wall tiles to go to the floor without the strip (baseboard) that goes around the base of the wall. First is this possible? Second, if possible how is it done? I've been told...
Basement stud walls
[ 4 Answers ]
I am beginning the process of finishing our walkout basement. One of the first challenges I have come across in laying out the walls is a number of plumbing and gas lines right at the top of the concrete exterior walls feeding the main and second story. The lines will prevent me from attaching... View more questions Search
|