Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ceiling Fan Installation
[ 15 Answers ]
Hi: I just bought a Hampton Bay Ceiling fan with remore model # 507 386 UPC # 082392726089 from home depot. I am trying to install the receiver, any tips? I have tried putting it into the mounting plate and I can not get it to fit. Any help would be greatly appreciated.
Ceiling fan installation
[ 8 Answers ]
I trying to install a ceiling fan with light combo. The house is "prewired" (5 yrs old). Under the cover/cap ceiling, there are 1 black, 1 white, 1 green, 1 pink. Followed instruction booklet I connect as follow: Fan black and blue to ceiling black Fan white to ceiling white Fan green to...
Ceiling Fan Installation
[ 1 Answers ]
I have a Hampton Bay fan to be installed on a 6' droprod to a slanted ceiling I need a canopy large enough to hold the remote receiver and able to let the 3/4 inch droprod swivel through the hole
Ceiling Fan Installation
[ 4 Answers ]
I have a very steep family room ceiling angle. I proceeded to install the fan and found out that the drop down bar does is not level due to the ceiling angle. Is there a special installation kit (hangar unit) for steeply angled ceilings? Barry
Ceiling fan installation
[ 3 Answers ]
? I have a used ceiling fan with lights and have no idea on how to wire it. I have 3 wires comeing out of the ceiling. Black, white and bare copper. The fan/light assembly has 3 wires black, blue and white. The mounting bracket has 1 green wire and the part the post part has a green wire on it... View more questions Search
|