Ask Experts Questions for FREE Help !
Ask
    betsy_bentley's Avatar
    betsy_bentley Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 17, 2009, 09:38 AM
    Ceiling fan blade removal
    How do I remove fan blades from Hampton Bay remote fan as pictured in link?

    Hampton Bay 52 In. Argenta Brushed Nickel Finish Ceiling Fan - 61413 at The Home Depot
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    May 18, 2009, 08:19 PM

    You will need to remove the light glass from the bottom of the fan. Apply pressure to it and rotate it until it drops out.

    You may also need to remove the light hardware inside the fixture. You will be able to access the blade screws from inside the light.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling fan blade removal [ 2 Answers ]

How do I remove the blades from a remote control, nickel and Black Hampton Bay fan?

Lawn Mower Blade Removal [ 1 Answers ]

Any suggestions on getting a blade off a lawn mower. I spent about an hour with a can of WD-40, ratchets, vice-grips, a hammer and I can't get the bolt to budge. Any secret tips out there? It's a standard 21" Murray push mower for reference.

Removal of Toro blade clutch [ 1 Answers ]

How do I remove the bolt (on the end of the crankshaft) that holds the electric blade clutch on a Toro commercial walk-behind Model 30159. When I try to turn it, the engine crankshaft turns with it.

Duerr Chipper Blade removal [ 1 Answers ]

I have a Duerr 5hp chipper shredder and I need to sharpen the blades. I have the cover off and the bolt that holds the cutter head out but it will not come off. Any ideas?

LT1000 Blade Removal [ 2 Answers ]

How do I lock the blade on a Craftman LT1000 riding mower to remove one of the blades

View more questions Search