Ask Experts Questions for FREE Help !
Ask
    arbytadb's Avatar
    arbytadb Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 3, 2009, 02:21 PM
    Kenmore Elite Dryer Intermittent Running
    Dryer will run for hours - no problem. Then, with a new load, when button pushed, it will not run. It turns on, but when button released, it stops. Appears cause may be overheating. It will run 3-4 hours later.

    Is this because it is overheating? What could cause of overheating be? Is it a part going bad? Could there be another problem?

    Thanks

    Arby
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    May 4, 2009, 03:33 AM
    Time to clean out all the lint around and in the motor. I use compressed air and a vac to do the job.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Kenmore elite dryer [ 2 Answers ]

The dryer does not heat up. I replaced the heating element, it still does not heat up when turned on? Any clues to what it could be?

Kenmore Elite Dryer Model # 110.63952101 won't stay running [ 3 Answers ]

I have a 3 years old Kenmore Elite Dryer (Model # 110.63952101). The dryer can be started and will heat, but shuts down after 1 to 2 monutes. It seems like a control problem. What do I need to replace?

Kenmore Elite Catalyst Not Running [ 2 Answers ]

Machine fills with water then makes a little clunk type sound and then nothing. Emptied out several times and still no motor activity just the little clunck/click noise. From previous post I am guessing the coupler? Is broken. I cannot find model number under lid. Only this on decal SM9711035. The...

View more questions Search