Ask Experts Questions for FREE Help !
Ask
    tripnic1944's Avatar
    tripnic1944 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 29, 2009, 08:52 PM
    Air bag codes
    I have a 1944 Mercury marquis. Air bag code 44 is flashing
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #2

    Apr 30, 2009, 12:16 PM

    If you have air bags in a 1944 Marquis, that's likely a retro-fit. I don't have any information on that... :eek:
    However, if you mean a 1994, we can talk about the RH Primary Crash Sensor and check to see if it's connected and mounted properly onto the vehicle.
    Has someone been working on the right front of the car? Like behind the right front bumper, just near the base of the rediator? You may find the harness and/or sensor damaged by rodents or road debris.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What should I look for from codes [ 2 Answers ]

I have a 2000 ford explorer, the check engine light is on, the codes are P0442 and evap control system leak detected ( small leak), P1507 idle air control underspeed error and P0401 EGR flow insufficient detected, what should I be looking for to fix this problem, I need to get this vehicle...

Obd codes [ 1 Answers ]

I have a 1997 Mercury Sable 3.0V6 and my scanner spits these 4 codes 141(o2 sensor bank 1 sensor 2) 171(feul system trim lean bank 1) 351(Ignition Coil A Primary/Secondary Circuit Malfunction) 1744 (Torque Converter Clutch System Performance) What can I do to fix 351 and 1744

91 crx codes [ 3 Answers ]

Ok, I went and did some snooping around today at my vehicle and the codes I got from the ECU are as follows. 3- MAP sensor 6- coolant temp sensor 10- TA sensor 13 PA sensor

Car codes [ 1 Answers ]

I need help trying to figure out a code on my vehicle

Codes [ 1 Answers ]

What is the new code and procedure for installing a 200 amp grounding service for a mobile home?

View more questions Search