Ask Experts Questions for FREE Help !
Ask
    buckwheat999's Avatar
    buckwheat999 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 29, 2009, 01:13 PM
    Working with 2" black poly supply line
    I need to install a Tee into 2" inch black poly pipe. The pipe is very stiff to work with. What's the best way to do this installation
    mazak's Avatar
    mazak Posts: 148, Reputation: 5
    Junior Member
    		  
    #2

    Mar 29, 2009, 01:27 PM

    You can try some dish washing soap, or some oil,something to make it slide easier. A hair drier or some type of heat may soften the pipe so it can slide in as well.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Supply line won't stop running. Main water supply off [ 3 Answers ]

I was doing some bathroom remodeling and attempted to remove an old supply valve. It would not budge so I decided to cut the copper tubing underneath it and put on a new shutoff valve with a compression fitting. The problem is that water just kept coming out of that supply line. The main water...

Commercial toilet with 3/4" supply line? [ 9 Answers ]

Hi all, I want to install a wall-mount toilet in my residential bathroom that is currently stripped to studs. To use a Duravit or Caroma, I would need to move the vent stack and studs to allow room for the in-wall tank, so I am exploring using a commercial toilet instead. Toto has a 1.28 gpf...

Changing wiring to use "second line" rather than "first" line on specific jack [ 9 Answers ]

Hi, and thanks! I have two phone lines (telephone numbers) coming into the house. I want to change a particular jack from one line to the other (exclusively for a fax). The current jack has a pair of tan wires going to "black (heavier wire and screw)", a pair of blue wires going to "red", a pair...

Fittings for LP Supply Line [ 1 Answers ]

I am trying to make a custom length of LP Gas supply line that has a swivel FPT fitting on each end. At first I was considering using vinyl hose, however I could not find any rated for vapor at the local hardware stores. Also, I'm not confident in adding fittings to the hose ends and preventing...

Maximum Number of Fixtures on 1/2" Supply Line [ 3 Answers ]

What is the maximum number of fixtures allowed on a 1/2" CPVC branch supply line? I currently have a bathroom sink, kitchen sink, bath tub faucet, and toilet supply line for a total of 4. Is this allowed by the International Plumbing Code 2006 version? Please quote where I can find this...

View more questions Search