Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Dielectric Unions - Necessary?
[ 11 Answers ]
I have searched this site and others to find information on whether Dielectric Unions are really necessary when joining copper and galvanized pipes. The problem; I have found conflicting advice. In my own case I decided to use them after replacing galvanized for copper at the lav. But both leaked...
Dielectric union
[ 7 Answers ]
A hot water heater has gav. Nibbles how long will a copper fitting last hook to is and how long will a dielectric union last how long have the dielectric union been out or made?
Water heater hook up/dielectric unions
[ 8 Answers ]
When I moved into this house the hot water heater (3 years old now, gas unit) was hooked up to the existing system with copper fittings. The whole house has copper supply lines. 1. Should I put dielectric fittings between the hot water heater and the copper lines? I know the dissimilar...
Dielectric Unions
[ 2 Answers ]
Do standard plumbing codes require dielectric unions on drain pipes?
Dielectric Union
[ 4 Answers ]
What is the estimated cost of putting in a dielectric union in a crawl space with about three feet of clearance between a copper/galvanized joint from a licensed plumber? Thanks! Hammer View more questions Search
|