Ask Experts Questions for FREE Help !
Ask
    rodlee's Avatar
    rodlee Posts: 4, Reputation: 1
    New Member
     
    #1

    Mar 27, 2009, 06:19 PM
    Dielectric unions
    About how long will a dielectric union last before the brass and copper eat each other up and leak?
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
     
    #2

    Mar 27, 2009, 07:37 PM

    Dielectric union will last for ever have not heard any one leaking, Thanks.

    John

    Installing A Dielectric Union To Join Galvanized And Copper Pipes - Plumbing System Components
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #3

    Mar 28, 2009, 12:37 PM

    I agree with John, the brass and copper do not touch and are separated by a plastic collar. I have never had one fail, yet. Are you tansitioning from galvanized to copper or what?
    rodlee's Avatar
    rodlee Posts: 4, Reputation: 1
    New Member
     
    #4

    Mar 28, 2009, 01:22 PM
    Yes it galvanized to copper on a hot water heater

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dielectric Unions - Necessary? [ 11 Answers ]

I have searched this site and others to find information on whether Dielectric Unions are really necessary when joining copper and galvanized pipes. The problem; I have found conflicting advice. In my own case I decided to use them after replacing galvanized for copper at the lav. But both leaked...

Dielectric union [ 7 Answers ]

A hot water heater has gav. Nibbles how long will a copper fitting last hook to is and how long will a dielectric union last how long have the dielectric union been out or made?

Water heater hook up/dielectric unions [ 8 Answers ]

When I moved into this house the hot water heater (3 years old now, gas unit) was hooked up to the existing system with copper fittings. The whole house has copper supply lines. 1. Should I put dielectric fittings between the hot water heater and the copper lines? I know the dissimilar...

Dielectric Unions [ 2 Answers ]

Do standard plumbing codes require dielectric unions on drain pipes?

Dielectric Union [ 4 Answers ]

What is the estimated cost of putting in a dielectric union in a crawl space with about three feet of clearance between a copper/galvanized joint from a licensed plumber? Thanks! Hammer


View more questions Search