 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Some of these heater packages come wired for 3 phase. If yours has a 3 lug connector block with 2 black on one lug, 2 yellow on one lug, and 1 black/1 yellow on one lug, simply combine the black wires on one lug, the yellow wires on another lug, and leave the third lug empty.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Please help. I want to replace an old Honeywell CT3600 thermostat with a new touchscreen RTH8500 on a gas hot air furnace w/AC. I think my confusion is what to do about the O and B wires (changeover HEAT and changeover COOL, as I understand it). Here is manual for new RTH8500: ...
Help! I have a brand new air conditioner and furnace and I cannot get the a/c on. I have read many sites and the problem seems to be no power to the outside unit. I have checked the breakers, but assume it hasn't been tripped as it has never been on! The other problem is that my panel is not...
I'm replacing an old General Controls T-90 thermostat (2 wire) with a new programmable thermostat in use with an old heat-only floor heater (no fan). The two wires coming from the wall are not color coded and I have not been able to track down the old terminal letter designators. The old unit has...
Is there any difference between a Power Distribution Unit (PDU) and a Remote Power Panel (RPP) in context of data center? If yes, then what is it?. Thanks.
Hi, I need help fixing ac unit. I called the help desk for my Hunter thermostat and they had me try and start the fan using a metal paper clip. The problem before I did that was that it wasn't starting. There was power but it wasn't regulating the temp. Well in the process I cause a shortage...
View more questions Search
|
