Ask Experts Questions for FREE Help !
Ask
    lilyow82's Avatar
    lilyow82 Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 19, 2009, 08:38 AM
    Shower Valve Removal
    I have a delta shower valve that I am trying to replace - I've removed everything and am down to the valve, but can't figure out how to remove it (it is recessed which makes things more difficult). Any suggestions?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Mar 19, 2009, 08:56 AM

    If you plan to remove the entire valve it is unlikely that you can do it without making the hole in the wall larger. Is it an option to rebuild this valve or what is the reason for wanting to remove it?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #3

    Mar 19, 2009, 10:24 AM
    Hi all:

    Ballengerb1 raises a good question lilyow... valves can be rebuilt most of the time.

    If rebuilding is a not an option... you can remove the valve by:

    1) enlarging the hole in front and then use a remodeler's plate (see picture) to cover up the hole...

    2) cut an access panel from behind and cut the old valve out from there... be careful NOT to burn the front if you end up soldering in a new valve from behind the tub wall... ;) I have seen it happen.

    Let us know if you need more information.

    MARK
    Attached Images
      

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Valve cover removal on 1998 z24 cavalier [ 8 Answers ]

I'm trying to remove my valve covers on my z24... 2.4 I have unbolted them but front part of cover seems to be still bolted maybe threw the front.. or are they just stuck on.. I can get it loose but something seems to be holding it down.. thanks steve:eek:

Shower diverter valve stub removal? [ 2 Answers ]

I'm swapping out an old Peerless 2-handle shower/tub w/diverter tub spout for a Price Pfister 3-handle non-diverter tub spout. The problem I'm having is that I don't know how to get the old diverter tub spout "stub" off. The tub spout threaded off and the stub is too big to slid back through the...

Stuck middle valve - 3 handle shower valve [ 3 Answers ]

Help and suggestions!! The middle handle, used to divert water from the tub spout to shower head is stuck in the 'tub' position. I have removed the handle and trim bezel and tried to turn the shaft with pliers - no luck & quit before marring the splines on the brass shaft. What now??

Delta valve removal/replacement [ 4 Answers ]

:( Hi, I am taking off an old single valve delta shower.( For bath and shower.) I have the handle off and the plastic nut but can't turn off the cap without fear of breaking the assembly. I see no set screw holding the cover or cap on. Ideas? Mikey 91

Replace shower Plumbing Valve assembly shower head 2 knobs [ 3 Answers ]

In a fiberglass corner shower shell. What I have is an old leaking rusted Shower valve assembly. It leaks from the Shower head that is a hand sprayer with a wall mount from the sprayer. It also leaks around the both the hot and cold water wall mount knobs. The cold water knob the sleeve that...


View more questions Search