Ask Experts Questions for FREE Help !
Ask
    philipjlacey's Avatar
    philipjlacey Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 17, 2009, 08:10 AM
    What engine oil for a B&S Vanguard V-twin OHV 16hp
    What engine oil for a B&S Vanguard V-twin OHV 16hp

    >Moved from Forum Help<
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Mar 18, 2009, 06:22 PM

    I use straight 30w, where do you live and what is your climate during the next work season?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    Mar 18, 2009, 08:37 PM

    Hi,
    I agree, and so does Briggs. Use a good quality oil SG or higher. You can use 10W30 but those are really only the viable choices.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing starter moter on 16HP V-Twin vanguard engine [ 11 Answers ]

I have a Briggs and Stratton 16HP V-Twin OHV Vanguard Engine I am repairing. I am trying to replace the starter motor. . The bendix of the starter motor is plastic and has broken teeth and therefore does not engage with the main flywheel anymore. In order to accomplish this task I have stripped...

Vanguard V twin Hunting engine [ 3 Answers ]

Hi all, I have a B&S vanguard 14hp ohv engine in my lawn mower. It has developed a problem of the engine hunting when driving and won't run unless the choke is out a little. The governor is popping up and down like a mad one, Any suggestions before it goes into the shop for an expensive repair. ...

16hp B&S Vanguard engine [ 3 Answers ]

I have a 16hp B&S vanguard engine, no compression in left cylender. Would this be rings or Valves and can I find out withouy breaking the engine down ? <moved>

16-hp vanguard v-twin ovhd-valve engine [ 2 Answers ]

Could you please tell how to adjust overhead valves on this engine??

16HP B&S Vanguard V Twin won't start [ 4 Answers ]

Hi My 16HP B&S Vanguard V Twin won't start. There was a thing with wires at the bottom of the carb, but when removing the carb to check for a blockage, the wire snapped off. However, this does not seem to prevent the float chamber filling with fuel. There is fuel being pumbed from the fuel pump...

View more questions Search