drawings or source for old parts
This uldtimber just stumbled upon you folks, and hope that some one might be able to help out. I am renovating an old, but beautiful old bathroom. It has American Standard fixtures,
and I am searching for parts: specifically: hot and cold water parts that consist of an assembly of a stem, and barrel with acme or square threads inside and out. The old replacement part tags that either my DAD, or old Bill left here read as follow: BLUE TAG
Group Z / Length 1, COLD Z1 -3C, Seat ---, Mfg. Am. Standard, Fixture #---, Old Bowers ---, GENUINE BOWERS STEMS,mfg by wrightway mfg co. The Hot tag has the same info on a red tag with these exceptions:Z1 - 3H, Old Bowers #R5300.
The barrels measure OD .870, ID .630, Length 1.630 inches. One is a rhand thrd. the other a lfthand thrd.. Not having the stems with me, my best recollection is that the length is about 3 inches with a spline at the front to accept the handle.
Any help with a source, or old drawings. Would be greatly appreciated. Thanks, Uldtimber
|