Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Drawings or source for old parts (https://www.askmehelpdesk.com/showthread.php?t=327959)

  • Mar 11, 2009, 02:49 PM
    uldtimber
    drawings or source for old parts
    This uldtimber just stumbled upon you folks, and hope that some one might be able to help out. I am renovating an old, but beautiful old bathroom. It has American Standard fixtures,
    and I am searching for parts: specifically: hot and cold water parts that consist of an assembly of a stem, and barrel with acme or square threads inside and out. The old replacement part tags that either my DAD, or old Bill left here read as follow: BLUE TAG
    Group Z / Length 1, COLD Z1 -3C, Seat ---, Mfg. Am. Standard, Fixture #---, Old Bowers ---, GENUINE BOWERS STEMS,mfg by wrightway mfg co. The Hot tag has the same info on a red tag with these exceptions:Z1 - 3H, Old Bowers #R5300.
    The barrels measure OD .870, ID .630, Length 1.630 inches. One is a rhand thrd. the other a lfthand thrd.. Not having the stems with me, my best recollection is that the length is about 3 inches with a spline at the front to accept the handle.

    Any help with a source, or old drawings. Would be greatly appreciated. Thanks, Uldtimber
  • Mar 11, 2009, 03:35 PM
    ballengerb1

    We have someone who will be here shortly, Tom will likely be able to help you along with Milo and Mark
  • Mar 11, 2009, 04:01 PM
    speedball1
    You might click on; AMERICAN STANDARD brand parts and faucets - PlumbingStore.com and check it out. Good luck, Tom
  • Mar 11, 2009, 04:08 PM
    massplumber2008
    Hi all...

    If Tom's links fail to help I would receommend that you take the parts down to a local plumbing supply house, preferably an american standard distributor, and see if they can help you on specifics here!

    Good luck!

    MARK
  • Mar 12, 2009, 03:31 AM
    Milo Dolezal

    Luckly for you , American Standard is still in business. Since you have all the model numbers, I would contact them. Here is the contact info: American Standard - Contact Us

    Mark had a good idea: go to your local plumbing store . They may have it or at least point you to the right direction.

    My store that I use for the purpose of buying old replacement stems has a 300 page catalog of Stems of all imaginable sizes, types and manufacturers. Stems are there drawn in life-size. So you can actually place your stem over the drawing and compare it with your stem. No guessing here. Once you select your stem, you pay for it and they send it to Arizona where it is manufactured. Turn around time is about 2-3 weeks. It is not cheap but you will get exactly what you want. If you are in So.California, I can give you contact info on this store. Let me know...
  • Mar 13, 2009, 08:31 AM
    ErnieM
    At times nothing can beat my local plumbing store. I happen to live in Levittown, and if you don't know that town is thousands of homes all made in assembly line fashion with the same parts.

    One local hardware store that's been around since the beginning (and is now an Ace store) goes the distance to stock replacement parts for these original fixtures!

    Mind you, it was at least a decade ago I went there for replacement parts for the original tub faucets. Levittown is now 60 and I don't think I have any original fixtures left, with the possible exception of the outside hose and that's scheduled for refit this spring!
  • Mar 13, 2009, 08:37 AM
    Milo Dolezal

    I always believed in asking that loud "...old fella in overalls..." that sits all day long by the check-out counter and endlessly chats with the store clerk. He probably never touched a tool in his life - but he certainly knows where you can get your hard-to-find faucet stem... :-D

  • All times are GMT -7. The time now is 06:14 AM.