Ask Experts Questions for FREE Help !
Ask
    HerCarr's Avatar
    HerCarr Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 9, 2007, 04:50 PM
    Installing Hampton Bay Eastridge Ceiling Fan
    My new ceiling fan came without installation instructions. Having installed 3 other fans the same week I attempted to install this one. To no avail... It did not work. I have two switches: one that controls the lights on the fan and one for the fan itself on the previous fan that I am replacing. The new fan comes with four wires: orange (Uplight), blue (downlight), black, and white. The previous fan had three wires: black, white, and red. Unfortunately, I did not remove the fan to see how it was connected. So here I am... I also forgot to mention, the new ceiling fan comes with a remote control. The electrical box only has a black, white, and uncovered ground.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #2

    Apr 9, 2007, 10:09 PM
    Ok, if you have two wall switches your ceiling should have more than just black, white and ground. Unless you only have one wall switch but it has separate buttons for fan and light? It might be specific to the old fan.

    Also, if the new fan has a remote, it should have a receiver that mounts and connects to the fan's four wires.
    grecola's Avatar
    grecola Posts: 1, Reputation: 1
    New Member
     
    #3

    Mar 9, 2009, 01:32 PM

    My new ceiling fan came without any instructions. Where can I get the instruction for my 60" eastridge ceiling fan with remote control. I got it from home depot, I think the # is 640659.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #4

    Mar 9, 2009, 02:09 PM

    grecola, you should just start your own post by clicking on ASK in the banner at the top. You can contact HD and they should be able to get you instructions. Try them [email protected]
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #5

    Mar 9, 2009, 02:25 PM
    Grecola,

    "The new fan comes with four wires: orange (Uplight), blue (downlight), black, and white. The previous fan had three wires: black, white, and red."


    Without seeing a wiring schematic, I would suggest that you connect Black from switch to the Black lead on the Fan.

    Then connect Red from the switch to the Orange and Blue light fixtures.

    The white from the switch should be connect to the black from the supply line. If it is, then it is carrying power from the supply line to the switch. If so, it should have a small band of black tape or paint on it to show that it is carrying power and is no longer a Neutral conductor.

    Any chance you can get us a picture?

    P.S. Bob, How's that for being creative. I changed the poster's name to make it appear as if I knew it all the time. Yuk! Yuk!
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #6

    Mar 9, 2009, 02:26 PM

    Don, that first guy with the wiring description was 2 years ago.
    Bob
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #7

    Mar 9, 2009, 02:46 PM
    Bob,

    I just cut and pasted from HerCarr's opening post. But when you are right, you are very right.

    I didn't notice the orignal posted date.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #8

    Mar 10, 2009, 10:53 PM

    Home Depot doesn't have Hampton Bay parts. You can contact Hampton Bay (their number is in our sticky) or just use these generic instructions:

    Ceiling fan installation - Ceiling Fans N More

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan-light works-fan doesn't [ 6 Answers ]

I installed a new Hampton Bay ceiling fan outdoors and the light works from a wall switch but the fan doesn't work at all. There is a white, black, red and ground wire coming from the ceiling. There is a white, black, black/white stripe (light) and green ground coming from the fan. I attached...

Hampton Bay ceiling fan light fixture stopped working but fan still works why? [ 14 Answers ]

New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:

Hampton bay ceiling fan lights & fan not operating [ 17 Answers ]

Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Hampton Bay Ceiling fan: fan speed pull chain [ 2 Answers ]

The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?


View more questions Search