Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Basement washer drain connection to existing floor drain
[ 10 Answers ]
I am on city service. I would like to connect my basement washer drain into the existing floor drain (3" line). I cut the line about 3 feet down from floor trap and installed a 3x2inch y. This existing floor drain takes a 45 turn about 6" down from where I cut it. The 2 inch will drain the washer ....
Basement Leak Prevention
[ 6 Answers ]
My husband and I recently bought a new home and experienced a basement leak from neighbor's home (semi attached) -- sump pumps were later installed. Our neighbor's sump pump is running with water 24/7 non stop. Our sump pump runs but not as frequent as our neighbor's. We are worried that we will...
Repairing Cracks in basement 7 inch slab, what is the best crack prevention.
[ 1 Answers ]
Hello All, I have a 10x12' foot bathroom on the downstairs slab, there are some cracks that I don't want opening up that is going to crack the heated saltillo tiles that I'm going to lay down. I saw RED-GUARD at Home Depot and I know there are other crack prevention/stretch type of protection. ...
Drain clog prevention tips
[ 1 Answers ]
We need some tips on preventing clogs in sink, shower and toilet drains.
Installing Basement Shower Drain with Washing Machine Drain
[ 5 Answers ]
Hi folks: I would like to install a shower that drains into the same drain as my washing machine. Right now the washing machine drain, 1-1/2" ABS, comes in horizontally about 12" above the concrete floor into a 1-1/2" Tee on a vertical pipe. From this Tee, the vent goes straight up to the... View more questions Search
|