Ask Experts Questions for FREE Help !
Ask
    blackcloud2918's Avatar
    blackcloud2918 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 20, 2009, 10:48 AM
    Hunter remote not working
    Hunter ceiling fan.its a round receiver under lite kit . Model cp-911or ser.218109. Alls will do is make motor humming noise no movement or lites. New battery. Checked continuity all pins are hot when wall switch is on.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Feb 20, 2009, 11:21 AM

    If it has pull chains, check their operation, and check bulb.
    If the motor is humming, receiver may be OK, capacitor may be the problem.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Feb 20, 2009, 05:42 PM

    The humming noise means the problem is in the receiver, not the remote. Contact Hunter Fan - Ceiling Fans, Air Purifiers, Humidifiers, Thermostats for replacement parts.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Hunter fan with Hampton Bay remote [ 7 Answers ]

I am attempting to install a Hampton Bay remote unit with my Hunter fan. The remote is suppose to be universal and has three speeds plus the light control. The remote instructions clearly state to to hook the black / white power leads to the ceiling power. This is straight forward and not an...

Universal Remote for Hunter fan [ 1 Answers ]

We have a Hunter Ceiling fan no idea what model number that is remote only. The dog ate the remote. We bought a universal remote for Hunter ceiling fans and need help with the wiring. Has old capicitor for old remote can only figure out a portion of the wires.

Hunter ceiling fan remote [ 11 Answers ]

Ok, what's wrong with this thing? My ceiling fan, a Hunter, is not that old. The remote to turn the fan or light on didn't work yesterday... so today, I did the most logical thing and bought new 12V batteries. After installing the new battery, the light did work, but the fan doesn't work still. ...

Hunter fan remote install [ 2 Answers ]

I am trying to install a hunter fan remote to a hunter fan. Nothing works. The remote has a black (hot) line, white (common) line, fan in, light in and common lines. Coming from the fan itself are a black line, black with white stripe, white and green line (ground). From the ceiling I...

Hunter remote wiring [ 5 Answers ]

I have installed an older model Hunter, w/remote and receiver only. The remote controls the fan as expected but does not/ is not controlling the light. The light stays on. Fan fwd, 3 speed, reverse work via remote. Which lead(s) control the light on/off via the remote/reciever, if any? I have...

View more questions Search