Ask Experts Questions for FREE Help !
Ask
    tatam's Avatar
    tatam Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 16, 2009, 11:40 PM
    Chilled water pump
    I have 4 chiller each capacity 105 tons and connected with old 3pumps each has 15 hp capacity.iwant change this pump by more capacity and enough to operate 4 chiller because I add one chiller extrrra
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
     
    #2

    Feb 17, 2009, 05:06 AM
    First of all, my question is... what was your question?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #3

    Feb 17, 2009, 07:41 AM
    Best to contact the services of a engineer.Mistakes on something of this nature are very expensive.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Chilled water pump for HVAC [ 15 Answers ]

Kindly let me know what pump I should use for a chilled water close loop system where required flow rate is 102 m3/hr and the max. hight of building is 100 ft.

Chilled water pipe [ 3 Answers ]

I am very new to askmehelpdesk.com. My question is, The building height is 300m. There are 6 chilled water risers going up to 125m height. The chilled water flow rate of each riser as follows. Riser 1 & 2 - 150l/s Riser 3 & 4 - 180l/s Riser 5 & 6 - 100l/s Chilled...

Chilled water pumps [ 2 Answers ]

How I can select the pump after I get the flow required and the head I have a closed loop system chillers in ground level and 35 floors height Are 4 bars enough to start the system which is the head that I calaculated? What is system pressure then? Do I have to add the vertical height also to...


View more questions Search