Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Post and beam house 2nd floor plumbing
[ 7 Answers ]
I have a post and beam house and want to install a new bathroom upstairs. The visible beams in my first floor are what support the second floor, hence no joist space. My question is related to the plumbing for the tub. I figure I need to build a platform for the tub to sit on. I want to know how...
Main support beam in house
[ 1 Answers ]
My floor has a 1"crown due to old cinderblock support under main beam in basement. I've set 2 new jacks in place (rated) for 15,000 lbseach, and want to knock out cinderblocks, hoping to correct crown in livingroom floor so I can install laminate . I have one jack on either side of the cinderblock...
Sewer smell below house on pier and beam foundation
[ 1 Answers ]
I rented out a small one bedroom to a tenant from hell. There was a sewer pipe burst and she did not inform us until after two weeks. Sewer water was all under the house and in the yard. We evicted the tenant, and the water has now dried up, but there is still an awful smell coming from under the...
Termite damage in beam supporting floor joists
[ 2 Answers ]
Termites got into the end of a beam supporting the floor joists in a crawl space under the first floor. I think I can use floor jacks and termporary beams on either side of the damaged beam to support the floor, then cut our the damaged beam. It is about 8 ft from the concrete foundation wall to...
Correct method to attach floor support beam to pole
[ 5 Answers ]
I'm building a cabin and have a peir/pole foundation. The floor is going to be supported by double 2"x12" bolted to the poles across a 10' span. The floor joists are going to sit on top of this beam. My question is what is the correct way to attach the double 2x12's... should I nail the 2x12's... View more questions Search
|