Ask Experts Questions for FREE Help !
Ask
    jacquemastin's Avatar
    jacquemastin Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 14, 2009, 03:57 PM
    300c transmission.
    My car will not go into gear. What should I do what should I look for to get it out of park?

    Is there a release switch somewhere that makes the car go into drive after you push on the brake that can go out and not let me put the car drive?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Feb 14, 2009, 04:01 PM

    Get the car on a flat surface, if possible. You may need to have someone push the car forward to take the pressure off the mechanism.
    this8384's Avatar
    this8384 Posts: 4,564, Reputation: 485
    Ultra Member
    		  
    #3

    Feb 19, 2009, 09:36 AM

    Check to see if your brake lights are working when you step on the pedal. If the brake switch on the pedal lever is bad, it won't let you shift out of drive.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Is it my transmission? [ 2 Answers ]

I own a 92 jeep cheroke and I admit I don't take the best care of it. This is mostly due to financial problems. Lately I think my transmission has been slipping but want to be sure. What are some signs that your transmission may be slipping. My vehicle shakes/vibrates when in motion. It also...

DC Transmission [ 2 Answers ]

What % of electrical energy transmission in USA is DC

Transmission pan [ 3 Answers ]

I need to find prices on transmission pans I searched everywhere and I can find prices just not prices for a 1997 Ford Taurus but if anyone can help it would be greatly appreciated or if you have any ideas how to fix a cracked transmission pan then that would also be helpful. Thank you for your...

Transmission ? [ 1 Answers ]

I have Murray riding mower (rear engine), everything works, but the mower will not go in gear, belt is intact. Any thoughts? Thanks

View more questions Search