Ask Experts Questions for FREE Help !
Ask
    lisaf27xx's Avatar
    lisaf27xx Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 12, 2009, 03:26 PM
    50amp supply for a sunbed at home
    Hi I have bought a commercial sunbed for home use, I believe that this need 50amp supply,
    I'm just not sure if I will already have this supply in my home? And if I do what work would need to be done to get this sunbed wired up thank you lisa
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Feb 12, 2009, 03:31 PM

    Yes you have the makings for a 50 amp feed in your home, assuming that you are not at the max allowable load for your main panel.

    I suggest that you call several electricians and get some bids on this work.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

AWG size for a for 50amp circuit [ 1 Answers ]

Want to add new circuit from existing 150amp/ 120/240v,1P panel. Will be adding a welding machine rated input is 50amp @240v. My question is what breaker size and wire gauge should I use? The distance from the existing panel to the new outlet will be about 100 feet in length. Thanks TShimaitis

Mobile home supply valves - non-standard sizes? No adapters? [ 3 Answers ]

I recently bought two appliances that need a cold water supply - a drinking water filter that mounts under/on the kitchen sink, and a self-cleaning cat box. Both come with T-valves that screw onto the supply valves, providing water for the appliances and the sink or toilet. The water filter...

How many minutes on a sunbed? [ 3 Answers ]

I have never been on a sunbed before so how long shall I go on? For a visually darker radiant tan?. I do not want to be burnt!! Please comment back because al my friends are planning to go tomorrow... THANKS:D XX

Mobile home electricity supply [ 1 Answers ]

I moved into a mobile home on a lot. It has no utilities hooked up. (big job! :( ), it has a breaker box in the closet with a 220v cord leading outside. The cord was cut from the box to its end hanging outside. I want to replace the cord and plug it in for power. (need an electrician to install 220...

100amp and 50amp subpanels [ 4 Answers ]

I am looking into installing 2 sub panels. The reason for this is the location of the current box in a finished room, with a finished ceiling. And the rest of the basement is NOT finished, and I don't want to mess with running a bunch of stuff through a finished ceiling. So I figured I would run...

View more questions Search