Ask Experts Questions for FREE Help !
Ask
    noknowledge's Avatar
    noknowledge Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 3, 2009, 07:15 PM
    Blank thermostat
    Can anyone give me info on a huner 44660 series thermostat, I just installed it, and the unit is still not kicking on I followed the manual, any help much appreciated.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Feb 3, 2009, 08:42 PM

    As a group, it appears we do the best help, but for some reason we tell people that bought a Hunter tstat to take it back.
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #3

    Feb 4, 2009, 04:24 AM
    Another Hunter victim...
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #4

    Feb 4, 2009, 06:31 AM
    Thanks guys,, I don`t feel so alone anymore, :)
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #5

    Feb 4, 2009, 07:41 AM

    Maybe we are intruding on your (wmproop's) responsibilities? Are we?

    To the original poster: Post the original stat model and the connected wires and terminals and we will tell you what kind of stat you need to purchase.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #6

    Feb 4, 2009, 09:59 AM
    The service rep is waiting for your call.
    Attached Images
     
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #7

    Feb 4, 2009, 01:55 PM
    [quote=KeepItSimpleStupid;1527148]Maybe we are intruding on your (wmproop's) responsibilities? Are we?





    No,no,, Kiss, I need all the help I can get on my campayne against Mr. Hunter and his junk
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Thermostat that goes blank [ 6 Answers ]

We got Honeywell thermostat that goes blank, digital screen, while the heat is on. If we want to increase or decrease the level we have to push button several times and wait until the display comes on and then we can change the setting. Is the thermostat bad? Why it would go blank? :confused:

Thermostat went blank! [ 4 Answers ]

OK, a summary, Goodman/janitrol heat pump has been working well for 4 yrs. A couple of days ago, the thermostat went blank, with no power to the condenser or evaporator (no I haven't checked voltage yet). I assumed (sorry:() that it was the transformer, so replaced that. No avail. Still no...

Honeywell Blank Thermostat [ 2 Answers ]

I have a Honeywell T8011R thermostat. It is blank. I have 120 vac coming in, the transformer has 28 vac coming out. The 5 amp fuse is fine and the control switch is on. On the circuit board with the 5 amp fuse, the brown wire from the transformer shows 28 vac, the double brown wire under it is...

Thermostat display is blank [ 6 Answers ]

I have a Honeywell programmable thermostat and the display is blank. We had a bad storm and the power went out. I have checked the breaker and reset it. The blower will come on when I switch it to ON, but nothing else works. Can someone help?

Blank Thermostat [ 6 Answers ]

Hi Guys, I had the A/C unit running fine today... then all of a sudden my thermostat went blank... It was raining on and off today here in Plano, Texas... It is a Carrier A/C furnace unit, controlled by a Honeywell Thermostat... This thermostat gets its power from the unit itself... In the...

View more questions Search