Ask Experts Questions for FREE Help !
Ask
    duck2dd's Avatar
    duck2dd Posts: 5, Reputation: 1
    New Member
     
    #1

    Jan 31, 2009, 05:53 PM
    Quiet miser
    We have a blower problem it is a whirlpool quiet miser the blower was re wired but it stays running never cuts off... all the other controls work fine...
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #2

    Jan 31, 2009, 07:02 PM

    Blower never shuts off? Is thermostat set to fan on or fan auto? You may also have a limit switch problem. Lets start with the thermostat settings. There should be an area on the thermotat that says fan,, on or auto, put it on auto. One other thing to check is the fan limit switch in the furnace, there may be a knob on the control that you can push in or pull out, in makes blower run contiuous, out makes it run automatic from heat of furnace.. Let me know what you find. And a little more info as to furnace make and model would help very much. Take care.
    duck2dd's Avatar
    duck2dd Posts: 5, Reputation: 1
    New Member
     
    #3

    Jan 31, 2009, 10:48 PM
    Quote Originally Posted by mygirlsdad77 View Post
    blower never shuts off? is thermostat set to fan on or fan auto? You may also have a limit switch problem. lets start with the thermostat settings. there should be an area on the thermotat that says fan,,, on or auto, put it on auto. One other thing to check is the fan limit switch in the furnace, there may be a knob on the control that you can push in or pull out, in makes blower run contiuous, out makes it run automatic from heat of furnace.. Let me know what you find. and a little more info as to furnace make and model would help very much. take care.
    This unit is in a trailor house it has the old turn type fan switch!! it was broke I can still turn it I think we have it on fan auto!! We don't know how to wire the thermostat either!! There is a new one in here but don't know where the wires go on this unit!! All I know is Whirlpool Quiet Miser(280561 was on a metal plate inside the furnace door )is that the model no.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #4

    Feb 1, 2009, 09:12 AM
    Quote Originally Posted by duck2dd View Post
    this unit is in a trailor house it has the old turn type fan switch!!!it was broke I can still turn it I think we have it on fan auto!!!!We don't know how to wire the thermostat either !!! There is a new one in here but don't know where the wires go on this unit!!! All I know is Whirlpool Quiet Miser(280561 was on a metal plate inside the furnace door )is that the model no.?

    There is No information available for your unit name or model number. Sorry
    duck2dd's Avatar
    duck2dd Posts: 5, Reputation: 1
    New Member
     
    #5

    Feb 1, 2009, 11:31 AM
    Quote Originally Posted by hvac1000 View Post
    There is No information available for your unit name or model number. Sorry
    Will this help!! This was on the tiny metal plate in the furnace(MH-6098 underwriters laboratories Inc. 7010640032381 this was on paper sticker)Gas-Fired Furnace Form 1 no.280561 Mobile Home Model 911030 Intertherm heat/cool Blower & optional Evaporator Coil Cabinet 910604!! Hope this will help you.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #6

    Feb 1, 2009, 03:23 PM
    911030 is a blower package number not a model number.

    Post your question on this link under Nordyne. All these folks do is mobile homes. Post all info.

    mobilehomerepair.com :: Index
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #7

    Feb 2, 2009, 05:18 PM

    Lot of exclamation points!! Make me think maybe you are a little frustrated with your furnace!! Or maybe mad that we can't fix your furnace from the chair at our computers!, lol.

    Please look at the info given by hvac, it should(hopefully) help you out. However, if you don't know how to wire the new thermosat, we can probably help if you can takes some pics of the thermostat(wire leads) and a pic of the thermostat connections at furnace.
    duck2dd's Avatar
    duck2dd Posts: 5, Reputation: 1
    New Member
     
    #8

    Feb 4, 2009, 08:04 PM
    Quote Originally Posted by mygirlsdad77 View Post
    lot of exclamation points!!!!!!!!!!!!!!!!!!!!!!, Make me think maybe you are a little frustrated with your furnace!!!!!!!!!!!!!!!!!!!!. Or maybe mad that we can't fix your furnace from the chair at our computers!!!!!!!!!!!!!!,,,lol.

    Please look at the info given by hvac, it should(hopefully) help you out. However, if you dont know how to wire the new thermosat, we can probably help if you can takes some pics of the thermostat(wire leads) and a pic of the thermostat connections at furnace.
    Naw not mad just don't know much about dad's furnace in his Town&Country Mobile Home.OK thanks.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #9

    Feb 5, 2009, 04:34 PM

    Just having a little fun. Did Hvacs link give you any help? If you have more questions, or more info, we will be glad to try and give advice. Please let us know what you are thinking.
    duck2dd's Avatar
    duck2dd Posts: 5, Reputation: 1
    New Member
     
    #10

    Feb 6, 2009, 07:44 PM
    Yep sure did thanks!! Have a nice day.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Power Miser 6 40 Gal water heater (shorty) popping reset button [ 7 Answers ]

Hi, I have a rental property with the above described hot water heater and have had some trouble determining exactly what my problem is. Here is a breakdown of what I've experienced. Hot water line burst just above the top of the tank and ran for a period of days spewing hot and eventually cold...

Water miser light flashes on my kenmore dishwasher [ 3 Answers ]

I bought a used Kenmore Dishwasher 665-16712000 9 months ago and it has worked great until now. The water miser light just keeps flashing and it won't start any cycle. If I hit the cancel/drain button the water miser light, the quick dry light, and the cancel/drain light all flash. Eventually...

Quiet kid [ 6 Answers ]

Why my kid doesn't speak and interact with others?

Kenmore Miser 12 Electric 40 Gal H2O Heater [ 2 Answers ]

Let me get to my problem. I just installed a Kenmore Miser 12 Electric 40 Gal H2O Heater Model #153.321440. I have 120 coming from the breaker into each side of the thermostat (i.e. if I use my voltage meter and touch one lead to a ground and one to the black wire or red wire each gives me 120)...

Rheem vs Sears Miser 12 [ 1 Answers ]

If I had to choose between this and a Rheem equivalent.. what cost would the Rheem be?is this a decent water heater? http://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=APPL&pid=04232144000&tab=spe#tab


View more questions Search